 |
|
 |
|
 |
 |
 |
 |
| Product No. |
Product Description |
Product Status |
| CS6223 |
Network 32-bit MCU /w Enhanced Peripherals and Interfaces |
Development | | Features: |
| • |
RISC
-MIPS-X5 unified RISC and DSP core up to 160M
-24-bit addressing space, up to 12MB
-256K SRAM (8KX32 8way), 256K ROM (16KX32 4way), 16KB cache
-Watch Dog Timer
-On-chip PLL for CPU clock generation
-Program Profile statistics
-32 Interrupt ¡V 16GPIO External
-SPI Flash Program Extension with single or two wires mode
-UART ISP and IAP
-EJTAGv2.6 Development Interface
|
| • |
Peripherals
-32 channel DMA engine integrated with peripherals
-Memory Controller with crosspoint switch and non-blocking memory accesses
-SGI graphics and display interface ,Tightly coupled with DMA
-10/100 Base-T Ethernet MACs with DMA round-robin
-SDIO Host 1-bit and 4-bit Compatible with MMC system specification 4.0 and SD Memory Card specification 2.0
-Hardware acceleration for DES/3DES/CRC-10/CRC-16/CRC-32 operations
-Hardware support for cache profiling and application performance analysis
-Embedded USB1.1PHY support 12M FS transfer
-Serial debug interface via EJTAG
-Up to 54 GPIO pins, with 8 capable of generating edge or level based IRQ¡¦s
-Glueless support of character LCD displays via GPIO functions
-Telephone-style keypad and LED support via GPIO functions
-16550 like 3 UART Interface. One dedicated UART support DMA and slave mode
-General purpose SPI interface
-CAN 2.0B protocol SJA1000 (Philips) compatible Basic CAN mode or Peli-CAN mode
-Real Time Clock, 16 spare registers
-12-bit SAR ADC, ADC conversion time < 5uS
-8-bit PWM DAC
-H.100/H.110, MVIP, SCSA and GCI/IOM-2compatibility via TDM port
-Two I2C Interface both programmable for master or slave operation
-External memory-mapped SPI interface supporting up to 4 serial flash devices with ECC function
-JTAG board-level test interface
-GCC-based IDE/compiler support with assembler and debugger
-Package: 128-pin QFP
|
| |
 |
 |
 |
 |
|  |
