| • |
1-Cycle 8051 core up to 24MHz operation
-16-bit Timers T0/T1/T2
-Programmable 30-bit Watch Dog Timer
-Integrated break point controller for software debugger
-One full-duplex UART0 port
-Up to 8 external interrupts shared with GPIO pins
|
| • |
256B Internal SRAM and 5888B XSRAM |
| • |
96KB Flash Memory
-Configured to be shared by ISP code, program code, and data flash
-Code security and content loss protection
-Endurance: 1000 cycles
|
| • |
Programmable Counter Array (PCA, 16-bit) with 6 CCP Modules
-Capture Mode
-Compare/Timer Mode
-8-Bit PWM Mode
-8-Bit Windowed PWM Mode
|
| • |
One 16-bit PWM output with programmable base frequency and duty cycle |
| • |
Two I2C Slave Controllers and one shared with I2C Master Controller pins |
| • |
One Master/Slave SPI Interface |
| • |
One full-duplex LIN-capable 16550-like UART |
| • |
Built-in one CAN controller according to CAN protocol version 2.0B. |
| • |
One Programmable CEC Controller |
| • |
3.68MHz Internal Oscillator +/- 2% |
| • |
Real Time Clock (RTC) less than 2uA |
| • |
Two Programmable Gain Amplifiers (PGAs) |
| • |
10-bit monotonic SAR ADC
-3.5us conversion time
-4 Intrinsic Time Multiplexed Channels
-10 inputs multiplexed with GPIO pins
|
| • |
Four Analog Comparators
-Two programmable 256-step threshold
-Input range 0V ~ 1.8V
-Detection time less than 250nsec
|
| • |
Three DPST Analog Switches |
| • |
Low Voltage Detection on VDD
-Programmable threshold 2.2V ~ 4.8V
-Low Voltage Interrupt or Reset
|
| • |
Up to 40 GPIO pins |
| • |
Power saving modes
-Normal operation: 5mA ~17mA
-PMM mode: 1mA ~ 5mA
-Idle mode: 1mA ~ 5mA
-Stop mode (recovered by hardware reset, or wake up by WK condition): 384uA
|
| • |
Single power supply: 2.5V ~ 5.5V |
| • |
Commercial (0oC ~ +70oC), and Extended Temperature range (-40oC ~ +85oC) |
| • |
48-pin LQFP Package and RoHS compliant |
