| • |
1-Cycle 8051 core up to 24MHz operation
-Two 16-bit Timers T0/T1
-One 16-bit ECT Timer T2
-Programmable 16-bit Watch Dog Timer
-Two full-duplex UART ports
-Up to 8 external interrupts shared with GPIO pins
|
| • |
Two I2C Slave Controllers and one shared with I2C Master Controller pins |
| • |
One Master/Slave SPI Interface |
| • |
One Programmable CEC Controller |
| • |
256B Internal SRAM and 1792B XSRAM |
| • |
32KB Flash Memory
-Configured to be shared by ISP code, program code, and data flash
-Code security and content loss protection
|
| • |
Programmable Counter Array (PCA, 16-bit) with 6 CCP Modules
-Capture Mode
-Compare/Timer Mode
-8-Bit PWM Mode
-8-Bit Windowed PWM Mode
|
| • |
3.68MHz Internal Oscillator +/- 2% |
| • |
Real Time Clock (RTC) less than 2uA |
| • |
Two Programmable Gain Amplifiers (PGAs) |
| • |
10-bit monotonic SAR ADC
-3.5us conversion time
-0-VDD or 0-0.5VDD full scale
-4 Intrinsic Time Multiplexed Channels
-10 inputs multiplexed with GPIO pins
|
| • |
4 Analog Comparators
-Two programmable 256-step threshold
-Input range 0V ~ 2.5V
-Detection time less than 250nsec
|
| • |
3 2PST Analog Switches |
| • |
Low Voltage Detection on VDD
-Programmable threshold 2.7V ~ 4.8V
-Programmable for generation of Low Voltage Interrupt or Low Voltage Reset
|
| • |
Up to 40 GPIO pins |
| • |
Power saving modes
-Normal operation: 5mA ~ 17mA
-PMM mode: 1mA ~ 5mA
-Idle mode: 1mA ~ 5mA
-Stop mode (recovered by hardware reset, or wake up by WK condition): 384uA
|
| • |
Single power supply: 3.0V ~ 5.5V |
| • |
Commercial (0oC ~ +70oC) and Extended Temperature range (-40oC ~ +85oC) |
| • |
Package: 48-pin LQFP |
| • |
RoHS compliance |